(as of Nov 22,2022 19:27:10 UTC – Details)
★.Tolerance ±0.02, no air bubbles, not easy to lift, good fluidity
★. Using high-quality materials, high purity, no waste, recycled materials, stable material and high quality output
★. The wire diameter tolerance is controlled at +0.02mm, which is more conducive to printing results, and the details determine success or failure.
★. Forming is not warped, not drawing. No plugging, the printed product has good effect, smooth and delicate, and the color is accurate.
★. Good tensile strength, ductility, fluidity, and low shrinkage.
★. Good hot melt: the surface is better and smoother after heating.
★.Environmental health: PLA environmental protection materials, meet the requirements, non-toxic and non-irritating taste, health and safety and environmental protection.
3D printing consumables PLA 1kg/disc
Wire diameter: 1.75mm
Printing temperature: 190~230°C
Melt flow rate: 5-7g/10min (190°C, 2.16kg)
Tensile strength: ≥60Mpa
Flexural modulus: ≥60Mpa
Elongation at break: ≥3.0%
Advantages: 1. Biodegradable materials, environmentally friendly. 2. The printed product has high gloss. 3. Good fluidity, printing is not easy to crack. 4. Printing large area products is not easy to lift. 5. No odor is emitted during the printing process.
Disadvantages: 1. It is not easy to remove the support. 2. The impact resistance is relatively low.
★. High purity: raw materials, non-doped waste, recycled materials. Will not block the head and will not cause insufficient extrusion.
★. High precision: The wire diameter tolerance is controlled at +0.03mm, which is more favorable for printing effect. If it is not blocked, it will not cause insufficient extrusion.
★. The effect is good: the molding is not warped, no air bubbles, the printing effect is good, smooth and delicate, and the color is accurate.
★. Good quality: good tensile strength, ductility, and low shrinkage. High toughness, low weight, and environmental health.
★. If you like him, buy it. The meaning of life is to do everything you like.