Gizmo Dorks ABS Filament 1.75mm 200g for 3D Printers, Heat Color Change Blue to White

Price: [price_with_discount]
(as of [price_update_date] – Details)

Gizmo Dorks ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.
Color changing filament is a special filament formulation that changes color when heat is applied. When the temperature of the plastic rises above approximately 88 F, the filament will change to another color. This also means that the plastic will change colors simply by touch such as when holding it in your hand. When the temperature drops down below 88 F, the filament changes back to it’s default color.

  • Extrusion Temperature: 225 – 250 C
  • Heated Bed: 80 – 110 C
  • Diameter: 1.75mm +/- 0.03mm
  • Net Weight: 200 grams

Colors available in 200g size

  • Standard – Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and White
  • Heat Color Changing Colors – Blue to White, Green to Yellow, Gray to White, and Purple to Pink
  • Black Light Reactive Colors – Fluorescent Yellow

Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool. It’s a perfect size to sample!
Product Dimensions ‏ : ‎ 5 x 5 x 2 inches; 7.05 Ounces
Date First Available ‏ : ‎ May 9, 2018
Manufacturer ‏ : ‎ Gizmo Dorks
ASIN ‏ : ‎ B07CZ3S6K7

ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant
Extrusion nozzle temperature: 225 – 250 C; Recommended to use a heated build platform
1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
Net weight: 200 grams / Spool Diameter: 5.125″ / Spool Width: 2″ / Spool Hub Diameter: 1.5″
Filament color is blue at room temperature and white when heated above 88F. Filament color returns back to blue when cooled below 88F.


Leave a Comment